Wednesday, September 27, 2017

Reset Canon MX360, MX366, MX368


Problem:
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error P07, blink 7 times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.

Printer:
Canon Pixma MX360, MX366, MX368

Reset Canon MX360, MX366, MX368

Step 1: Enter Service Mode
1.   Turn off the printer.
2.   Press and hold the Stop/Reset/Resume button.
3.   Press and hold the Power/On button.
4.   Release the Stop/Reset/Resume button (the Power/On button is still pressed).
5.   Press and releasing the Stop/Reset/Resume button 4 times.
6.   Press and hold the Stop/Reset/Resume button.
7.   Release the Power/On and Stop/Reset/Resume buttons together.

After the both buttons are released, the Power/On indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.

Step 2: Reset Canon MX360 series
To reset the Canon MX360, MX366, MX368 can be done with (select one):
a.     Service Tool v.1074
b.     Service Tool v.3400

a.     Reset with Service Tool v.1074
·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
·            Extract file and open Service Tool
·            Load paper
·            Clear Ink Counter, click MAIN (1)
·            Wait the printer finish printing D=000.0
·            Click OK
·            Close Service Tool
·            Turn off printer (wait 10 seconds)
·            Turn on printer
·            Printer ready for use

b.     Reset with Service Tool v.3400
·            Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
·            Extract file and open Service Tool
·            Load paper
·            Clear Ink Counter, select MAIN (1)
·            Set (2)
·            Wait the printer finish printing D=000.0
·            Click OK
·            Close Service Tool
·            Turn off printer (wait 10 seconds)
·            Turn on printer
·            Printer ready for use


No comments:

Post a Comment