Problem:
Waste ink tank full,
waste ink pad full, the ink absorber is almost full, error 5B00, error P07,
blink 7 times, blink 8 times, the ink absorber
becomes almost full, error E08, error E07, E27.
Printer:
Canon Pixma MP180
Reset Canon MP180
Step 1: Enter Service
Mode
1. Turn off the printer.
2. Press and hold the Stop/Reset button.
3. Press and hold the On/Off button.
4. Release the Stop/Reset button (the On/Off
button is still pressed).
5. Press and releasing the Stop/Reset button 1
times.
6. Press
and hold the Stop/Reset button.
7. Release the On/Off and Stop/Reset buttons
together.
After the both buttons
are released, the indicator will blink green for some time and then the green
will light constantly and the printer LCD show “0”.
If after follow points
1-7 the green light not constantly but the printer continues to show an error,
it's mean you made a mistake in points 1-7. Turn off the printer and repeat
step 1.
Step 2: Reset Canon MP180
To reset the Canon MP180 can be done with (select one):
a.
Manual
reset
b.
MPTool
v0.8.0a
c.
MPTool
v0.9.6
a.
Manual
reset
8. Press the Stop/Reset button 4 times (each
time the Stop/Reset button is pressed, the power indicator changes color).
9. Press the On/Off button 1 time to confirm the
selected action (reset the absorber counter).
10. Press the On/Off button 2 times to turn off the printer.
11. Turn on the printer
and now the printer is ready for use.
Another command for points 8:
Press the Stop/Reset
button: 1 times – Orange – Service test print (load
paper before do it)
Press the Stop/Reset
button: 2 times – Green – EEPROM information print
(load paper before do it)
Press the Stop/Reset
button: 3 times – Orange – EEPROM initialization
Press the Stop/Reset
button: 4 times – Green – Waste ink counter setting
Press the Stop/Reset
button: 5 times – Orange – Destination setting (then
Press Power, Press Stop/Reset 3x)
Press the Stop/Reset
button: 6 times – Green – Print head deep cleaning
Press the Stop/Reset
button: 11-13 times – Orange, Green, Orange – Return to
menu selection
Press the Stop/Reset
button: 14 times – Green – Left margin correction
b.
Reset
with MPTool v0.8.0a
·
Extract file and open MPTool.
·
Click printer model (1)
·
Waste ink counter, Reset Main (2)
·
Exit MPTool (3)
·
Turn off printer (wait 10 seconds)
·
Turn on printer.
·
Printer ready for use.
c.
Reset
with MPTool v0.9.6
·
Extract file and open MPTool.
·
Click printer model (1)
·
Waste ink counter, Reset Main (2)
·
Exit MPTool (3)
·
Turn off printer (wait 10 seconds)
·
Turn on printer.
·
Printer ready for use.
No comments:
Post a Comment