Wednesday, September 20, 2017

Reset Canon iP1300


Problem:
Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error p07, blink 7 times, blink 8 times, the ink absorber becomes almost full, error E08, error E07.

Printer:
Canon Pixma iP1300

Reset Canon iP1300:

Step 1: Enter Service Mode
1.   Turn off the printer.
2.   Press and hold the Resume button.
3.   Press and hold the Power button.
4.   Release the Resume button (the Power button is still pressed).
5.   Press and releasing the Resume button one time.
6.   Press and hold the Resume button.
7.   Release the Power and Resume buttons together.

After the both buttons are released, the power indicator will blink green for some time and then the green will light constantly.
If after follow points 1-7 the green light not constantly but the printer continues to show an error, it's mean you made a mistake in points 1-7. Turn off the printer and repeat step 1.

Step 2: Reset Canon iP1300
To reset the Canon iP1300 can be done with:
a.         General Tool v1.00
b.         iPTool v0.9.2
c.         iPTool v1.1.5
d.         Service Tool av.300
e.         Service Tool av.700
f.          Service Tool v.4905

a.  Reset with General Tool v1.00
·         Download General Tool (support Win XP, Vista, 7, 8, 8.1, 10).
·         Extract file and open General Tool.
·         Select USB Port (1)
·         Device ID (2)
·         Lock Release (3)
·         Set Destination, select printer model (4)
·         Load Paper to the printer
·         Clear waste ink counter, select MAIN (5), wait for the printer to finish printing
·         Close General Tool (6)
·         Turn off printer (wait 10 seconds)
·         Turn on printer.
·         Printer ready for use

b.  Reset with iPTool v0.9.2
·         Download iPTool (support Win XP, Vista, 7, 8, 8.1, 10).
·         Extract file and open iPTool.
·         Click printer model (1)
·         Waste ink counter, Reset Main (2)
·         Exit iPTool (3)
·         Turn off printer (wait 10 seconds)
·         Turn on printer.
·         Printer ready for use.

c.  Reset with iPTool v1.1.5
·         Download iPTool (support Win XP, Vista, 7, 8, 8.1, 10).
·         Extract file and open iPTool.
·         Click printer model (1)
·         Waste ink counter, Reset Main (2)
·         Exit iPTool (3)
·         Turn off printer (wait 10 seconds)
·         Turn on printer.
·         Printer ready for use.

d.  Reset with Service Tool av.300
·         Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
·         Extract file and open Service Tool
·         Select USB Port (1)
·         Device ID (2)
·         Lock Release (3)
·         Set Destination, select printer (4)
·         Set (5)
·         Clear waste ink counter, click MAIN (6)
·         Close Service Tool (7)
·         Turn off printer (wait 10 seconds)
·         Turn on printer.
·         Printer ready for use.

e.  Reset with Service Tool av.700
·         Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
·         Extract file and open Service Tool
·         Select USB Port (1)
·         Device ID (2)
·         Lock Release (3)
·         Set Destination, select printer (4)
·         Set (5)
·         Clear waste ink counter, click MAIN (6)
·         Close Service Tool (7)
·         Turn off printer (wait 10 seconds)
·         Turn on printer.
·         Printer ready for use.

f.  Reset with Service Tool v.4905
·         Download Service Tool (support Win XP, Vista, 7, 8, 8.1, 10)
·         Extract file and open Service Tool
·         Load paper
·         Clear Ink Counter, select MAIN (1)
·         Set (2)
·         Wait the printer finish printing D=000.0
·         Click OK
·         Close Service Tool
·         Turn off printer (wait 10 seconds)
·         Turn on printer
·         Printer ready for use


No comments:

Post a Comment