Friday, February 20, 2015

How to Create Hirens BootCD Run from USB Flash Drive

Follow instruction below, how to install Hiren's BootCD from USB stick

Methode 1
1. Download Rufus 2.15 (exe)
2. Download Hiren's BootCD 15.1 (iso) or Hiren's BootCD 15.2 (iso)
3. Insert flash drive and open Rufus
4. Select image file
5. Click START to start

Methode 2
1. Download Hiren's BootCD 15.1 (iso) or Hiren's BootCD 15.2 (iso)
2. Download USBFormat (rar)
3. Download grub4dos (rar)
4. Extract all files (see picture)
5. Insert USB flash disk - open USBFormat folder - double click usb_format - Quick Format - Start
6. open grub4dos folder - double click grubinst_gui - select USB stick - click Refresh -
    select Whole disk (MBR) - click Install
7. Press ENTER when show this image
8. Copy and paste files grldr and menu.lst to flash disk
9. open Hiren's BootCD.15.1 folder - copy and paste all files to flash disk Finish

files list on flash disk

15 comments:

  1. Great article Lot's of information to Read...Great Man Keep Posting and update to People..Thanks
    USB名入れ

    ReplyDelete
  2. This is awesome. Thanks for posting up your notes. This will be very helpful
    USB flash

    ReplyDelete
  3. DEAR I HAVE TWO PEN DRIVES 8 GB EACH LAYING DEAD DUE TO WRITE PROTECTED PROBLEM DO U HAVE HAVE ANY TOOL TO FORMATE IT AOR ANY OTHER GOOD WORKING METHODE PLEASE SEND IT ON TO MY EMAIL PLEASE

    ReplyDelete
  4. HOW TO FORMATE A WRITE PROTECTED PEN DRIVE COULD ANY BODY OF U HAVE ANY IDEA DEAR FRIENDS

    ReplyDelete
  5. Hi buddy, on running Test/Repair Bad Sectors, it is giving error: a runtime error 217 is occured
    the four rows at top consists of : 0x00068997, 0x0006B18F, 0x000A3FAF, 0x000020A1

    ReplyDelete
  6. HELLO THANK FOR THE POST
    I apply all your instruction I've select in the bios USB boot, but the system tries to boot on the USB but nothing boot. Do I have to make a bootable USB DOS? or do you have an other solution,
    thank for your help

    ReplyDelete
    Replies
    1. When Hirens Boot flash is not readable when booting from usb, chances are when you run USBFormat.exe an error occurs.
      Alternative way, Create a Hirens Bootable CD.
      If you have downloaded the Hirens.iso file. All you need is FreeISOBurner (free). Link download and how to use FreeISOBurner, follow the instructions in this blog https://goo.gl/RIwHUr

      Delete
  7. After downloading the iso file you can use rufus also

    ReplyDelete
  8. my drives ntfs system formate

    ReplyDelete
  9. I accidentally dropped my wd my passport 1tb it is almost full now it is not working properly, it detects in the control panel but not mount in the my computer. please help

    ReplyDelete
  10. After choosing "1.HDAT2 4.53" option, It says "Warning: the high memory area (HMA) is not available, Additional low memory will be used instead. Creating 64Mb Ram Drive as R:" , i don't know what to do next >.<

    ReplyDelete