How to Fix Canon Pixma MP258 Error E08

Error code E08 on Canon Pixma MP258 mean the ink absorber is almost full.

Solution for this problem is reset printer. How to fix error E08 on Canon Pixma MP258, follow instruction below:
1.  Turn off printer
2.  Make printer on service mode condition
     -  Press and hold Stop/Reset button
     -  Press and hold Power button
     -  Release Stop/Reset button (Power button, still pressed)
     -  Press and release Stop/Reset button 1x
     -  Press and release Stop/Reset button 1x, and release Power button
     -  Computer will detect New Device
 
     Note;  
     If show this message "Found New Hardware Wizard", click CANCEL

3.  Open software Resetter Canon Pixma MP258.
     Download Resetter Canon Pixma MP258
4.  Set Destination
     -  Region : select region. Example; ASA for Asia
     -  Click : SET - OK

5.  Load paper
6.  Click MAIN, wait for the moment. The printer will print D=000.0


7.  Click EEPROM Clear - OK

8. If you want to print EEPROM data, click EEPROM


9.    Turn off printer.
       Have problem when use software re-setter, read this Problems When Reset Canon Printer

10.  Turn on printer and try to print document. When try to print, show message E13 (The following ink may have run out color/black).

11.  To fix E13 on Canon Pixma MP258, press and hold STOP/RESET button 5 seconds. Finish

If you have trouble, watch the video below

How to Fix Canon Pixma MP258 Error E08

Problems When Reset Canon Printer


logoblog