Friday, December 2, 2011

Fix Pqi Flash Drive


Dr. UFD is the software used to fix the Pqi flash drive. There are two type problems on flash disk can fix with Dr.UFD;




1.  Partition Table Problems

  • Characteristics; file system RAW/unknown, used space 0 bytes, free space 0 bytes, flash drives can not be formatted (quick/full format, and format from Administrative tools), when format show error "The format did not complete successfully", flash drive capacity is true. (picture)

Partition Table Problems


  • For partition table problems; data can be recovered and flash disk can be fixed
  • If Pqi flash drive have problems like this, before use Dr.UFD, run data recovery to saved all data.


2.  Firmware Problem

  • Characteristics; file system RAW/unknown, used space 0 bytes, free space 0 bytes, flash drives can not be formatted (quick/full format, and format from Administrative tools), when format show error "The format did not complete successfully" or "The disk is write protected", flash drive capacity is not true. (picture)
Firmware Problems



  • For firmware problems; data can not be recovered and flash disk can be fixed.
Note
Dr.UFD can not be used to data recovery. Highly recommended, before using Dr.UFD, data has been saved. Dr. UFD function to fix a flash drive but all data will be lost.

To avoid mistakes in the repair flash drive, you should do the Analysis of Damage a Flash Drive

Fix a Pqi flash disk with Dr.UFD

1. Save data

For Partition Table Problems; data can be recovered

For Firmware Problems; data can not be recovered

Download and install EASEUS Data Recovery software (free) - open program - select Complete Recovery - select flash drive - Next - wait until process is complete - select data to be saved - saved to your hard drive.






2. After all data saved, do the repair flash drive using Dr.UFD (support Win XP, Vista, 7).

Download and install Dr.UFD (free)

How to open Dr. UFD for Windows XP = double click file Dr. UFD.exe
How to open Dr. UFD for Windows Vista & 7 = right click Dr. UFD - select Run as Administrator.

3. After Dr. UFD opened - OK - Complete - Update - wait process - Finish.
4. After process is completed, remove the flash drive from the computer, then insert it again.
5. Restore all data into the flash drive.





 Video Repair Pqi Bad Sector 

 

2 comments:

  1. not work .. i have kingston 2.0 8gb pendrive ..

    ReplyDelete
  2. Thanks ...Brother uploading such a valuable soft .
    please Cary on ...

    ReplyDelete